I used a coat hanger once and hooked it into one of the air vents on the reciever, it worked until the bass vibrations rattled it from its precarious connection.
My grounding is all fucked on my TTBL... every so often, it will generate this buzzing sound and in order to fix it, I have to take it out of the screwed connecting and touch it to an RCA jack...
Comments
loosen a screw on your mixer, put the wire in there, and tighten the screw back up.
bingo.
I would not advise it mind you...
man, Id advise not to loose up just any screw on the mixer.
Just make sure the screw is attached to the main under housing.
had to do that way too often at wack clubs... a little bit of wire on the fly...